聚氯乙烯专用树脂生产过程中的节能降耗

聚氯乙烯专用树脂自投产以来,经过一系列技术革新、工艺改造,不断降低纯水、助剂等原料消耗,来达到聚氯乙烯专用树脂生产节能降耗的目的。     

气候环境实验室地面结冰云雾模拟控制系统设计

飞机结冰会引起飞机气动特性、动力系统性能改变,甚至造成飞行事故。地面结冰云雾模拟设施作为一种模拟飞机飞行结冰条件的重要设备,常用于飞机防除冰系统功能验证。针对气候环境实验室结冰云雾试验条件需要,在对地面结冰云雾模拟系统进行研究的基础上,对适用于气候环境实验室的结冰云雾模拟系统进行了设计。对系统关键设计技术、系统功能及组成进行了分析,并对控制系统方案进行了详细阐述。试验表明,控制系统人机界面友好,运行可靠,能够满足液态水含量、雾滴直径参数的精确调节,产生符合试验所需的结冰环境。     

Structural parameter design method for a fast-steering mirror based on a closed-loop bandwidth

When a fast-steering mirror (FSM) system is designed, satisfying the performance requirements before fabrication and assembly is vital. This study proposes a structural parameter design approach for an FSM system based on the quantitative analysis of the required closed-loop bandwidth. First, the open-loop transfer function of the FSM system is derived. In accordance with the transfer function, the notch filter and proportional-integral (PI) feedback controller are designed as a closed-loop controller. The gains of the PI controller are determined by maximizing the closed-loop bandwidth while ensuring the robustness of the system. Then, the two unknown variables of rotational radius and stiffness in the open-loop transfer function are optimized, considering the bandwidth as a constraint condition. Finally, the structural parameters of the stage are determined on the basis of the optimized results of rotational radius and stiffness. Simulations are conducted to verify the theoretical analysis. A prototype of the FSM system is fabricated, and corresponding experimental tests are conducted. Experimental results indicate that the bandwidth of the proposed FSM system is 117.6 Hz, which satisfies the minimum bandwidth requirement of 100 Hz.     

COB LED自动在线点胶测试补粉机的研制

在COB(Chip On Board)LED光组件制造领域,点胶、测试和补粉关键工艺基本以手工或半自动为主。为了保证COB LED产品质量一致性、提高生产效率,研制了一种COB自动在线点胶测试及补粉一体机,实现点胶、测试、补粉生产工序的自动化生产。阐述了其工艺流程及设计总体方案,提出了荧光粉量修补方法,修正初次点胶量,实现动态调节,减少人工干预。经实验验证,该一体机可以提高点胶工艺的自动化程度,具有运行速度快、可靠性好、性能稳定等特点。     

基于多项式变换的参数估计方法

本文给出一种采用DPT估计SNCK信号时宽—带宽积的方法,并通过仿真该估计方法的性能与其它估计方法进行比较.首先给出SNCK信号参数估计的一般过程.为了便于计算和理论推导,根据估计出的中心频率将接收到的SNCK信号搬移到零频,从而进一步估计其它参数,如采用DPT估计SNCK信号时宽带宽积.本文将重点研究采用DPT算法估计SNCK信号值的方法.     

Inhibition of counterflow methane/air diffusion flame by water mist with varying mist diameter

In the present study, the effect of fine water mist on extinguishment of a methane–air counterflow diffusion flame was investigated to understand the underlying physics of fire extinguishment of highly stretched diffusion flame by water mist. Twin-fluid atomizers were used to generate polydisperse water mist of which Sauter mean diameters were 10, 20, 40, and 60 μm. When water mist is not added, the critical stretch rate at extinguishment is 439 s⁻¹ as compared to the theoretical value of 460 s⁻¹. For the case with water mist addition, when the stretch rate is small enough, almost all the water mist evaporates within the flame zone. On the other hand, for high stretch rate case, large mist droplets pass through the flame zone and can reach the stagnation plane. However, no oscillatory motion was found around the stagnation plane. Critical stretch rate at extinguishment decreases monotonously with the mass fraction of water mist independently of the mist diameter within the range of D₃₂ from 10 μm to 60 μm. On the other hand, with increase in the surface area parameter, the critical stretch rate at extinguishment decreases rapidly and becomes less sensitive at large surface area parameter, of which tendency is qualitatively in good agreement with theoretical predictions. For a constant surface area parameter, the critical stretch rate decreases with mist diameter because the mass fraction of water mist should increase in proportion to the mist diameter to keep the surface area parameter constant. When the water mist evaporates completely in the flame zone as in the present study, the mass fraction of the water mist is the dominant factor for fire extinguishment, rather than the surface area parameter. Therefore, an appropriate combination of stretch rate and water mist mass fraction should be provided to suppress effectively a given fire with a small amount of water mist.     

Optimized microwave excitation probe for general application in NDT of wall thinning in metal pipes of arbitrary diameter

Generalized approaches to developing a microwave NDT for flaws inside an arbitrary diameter pipe through optimizing a microwave-exciting probe were investigated. A microwave probe obtained from a parameter-optimizing scheme based on transmission characteristics is proposed. Three-dimensional finite element simulation of five microwave probes indicates that a larger optimization parameter enables reduced microwave reflection, as well as improved single-mode propagation inside the pipe as compared with conventional probes. Experimental verification, using straight brass pipes of various diameters confirmed that the optimized microwave probe exhibits a larger signal-to-noise ratio for internal flaws when compared with conventional probes, thereby validating the new optimization parameter.     

有线网络Cable-WiFi的技术架构及其运营

近年来由于移动终端技术的快速发展和数量的爆炸式增长,移动互联网成为网络运营商争夺的又一个制高点,针对无线宽带网络的布控,介绍有线网络Cable-Wi Fi的技术架构模式及其运营情况。     

Data-driven model reduction-based nonlinear MPC for large-scale distributed parameter systems

Model predictive control (MPC) has been effectively applied in process industries since the 1990s. Models in the form of closed equation sets are normally needed for MPC, but it is often difficult to obtain such formulations for large nonlinear systems. To extend nonlinear MPC (NMPC) application to nonlinear distributed parameter systems (DPS) with unknown dynamics, a data-driven model reduction-based approach is followed. The proper orthogonal decomposition (POD) method is first applied off-line to compute a set of basis functions. Then a series of artificial neural networks (ANNs) are trained to effectively compute POD time coefficients. NMPC, using sequential quadratic programming is then applied. The novelty of our methodology lies in the application of POD's highly efficient linear decomposition for the consequent conversion of any distributed multi-dimensional space-state model to a reduced 1-dimensional model, dependent only on time, which can be handled effectively as a black-box through ANNs. Hence we construct a paradigm, which allows the application of NMPC to complex nonlinear high-dimensional systems, even input/output systems, handled by black-box solvers, with significant computational efficiency. This paradigm combines elements of gain scheduling, NMPC, model reduction and ANN for effective control of nonlinear DPS. The stabilization/destabilization of a tubular reactor with recycle is used as an illustrative example to demonstrate the efficiency of our methodology. Case studies with inequality constraints are also presented.     

Two‐Parameter Continuation and Bifurcation Strategies for Oscillatory Behavior Elimination from a Zymomonas mobilis Fermentation System

Two‐parameter continuation and bifurcation analysis strategies were applied to deal with the oscillatory phenomena of a Zymomonas mobilis ethanol fermentation system. A structured verified non‐linear mathematical model considering the physiological limitations of microorganisms for a single continuous fermenter for ethanol production using Z. mobilis was built to identify the Hopf bifurcation (HB) points, which indicate the oscillatory behavior, using the inlet substrate concentration and the dilution rate as bifurcation parameters. The path of the HB points can be determined with different controlling operating parameters. It was found that with the addition of a small amount of cells or ethanol to the feed stream or by increasing the dilution rate, the oscillations could be eliminated and steady‐state behavior was attained. Using a two‐parameter continuation strategy, the Z. mobilis fermentation system could operate at steady state without oscillatory behavior.